Menjual :
- GATE VALVES, GLOBE VALVES, CHECK VALVES, BALL VALVES, BUTTERFLY VALVES, DIAPHRAGM VALVES, CONTROL VALVES, DUPLEX STRAINER, EXPANTION JOINT, KNIFE VALVES, MOTOR VALVES RUBBER FLEXIBLE JOINT, SAFETY VALVES, STEAM TRAP, Y-STRAINER.
Material : Forged Steel / Stainless Steel / Cast Carbon
Size range: 1.5" ( 15mm) to 36" ( 900mm)
Class: 150lbs to 4500lbs
Connections: Socket Weld Ends, Screwed Ends, RF, RTJ, BW, etc
Specification: ASTM/ ASME A105N
ASTM/ ASME A216 WCB
ASTM/ ASME A351 CF8M
ASTM/ ASME A182 F316/ 316L
- SOLENOID VALVE, SPEED CONTROLLER SOLENOID VALVE, PNEUMATIC VALVE, PNEUMATIC PRESSURE SWITCH, PNEUMATIC CYLINDER
Solenoid Valve for General Purpose, Pneumatic, Steam, High Pressure, Aggressive.
Type : 2 Way Gas Valves, 2 Way Oil Valves, 3 Way Oil Valves, Q2 Quick-Connect Plastic Body Valve, Model 8208 2-Way Plastic Media Isolation Valve, Model 8257 2-Way Stainless Steel Diaphragm Valve, Model 8501 2-Way Brass Flat Piston Valve, Model 8241 2-Way Brass Diaphragm Valve, Plastic Body Medical Valve
Pneumatic/ Electric : Piston Diaphragm, Ball, Butterfly, Control Proportional Valve
- CARBON STEEL / LOW & HIGH TEMPERATURE
Seamless / ERW / SAW / HF-ERW
Size range : ¼ ” ( 8mm) to 42” ( 1000mm)
Schedule : Sch 10 to Sch 160
Specification: API5LGr B / PSL I/ PSL II
ASME/ ASTM SA106 GrB/ A53 Gr B
API5L Grade X42/ X52/ X60/ X65
ASME/ ASTM SA 335 Grade
P5/ P11/ P22/ P91
ASME/ ASTM SA333 Grade 6
- STAINLESS STEEL PIPE/ PLAT/ TUBE/ ROUND BAR
SEAMLESS & WELDED
SIZE RANGE: ¼ ” ( 8MM) TO 12” ( 300MM)
SCHEDULE: SCH 10S, 40S, 80S
SPECIFICATION: ASTM/ ASME A312 & A358
GRADE: 304/ 304L, 316/ 316L, 317, 321 & DUPLEX MATERIALS
SEAMLESS / ERW
GRADE : AISI 304/ L, 316/ L/ TI, 310/ S, 630 ( 17-4 PH) , 317/ L, 253 MA, 330, 347, 410, 420, 430.
- GENERATOR/ GENSET DIESEL EURO POWER SERIES
Cummins( EP)
Deutz( EP)
Mitsubishi( EP)
MTU( EP)
Perkins( EP)
- FLOW METER Italia SPA Model KM3 and KM4 Meters - TUTHILL
These 1" nutating disc meters measure - in liters - dispensed fuels and lubricants. The cover and body are constructed of aluminum and can be rotated to give four different flow configurations. The KM3 has a 3 digit readout ( 6 digit cumulative) and the KM4 has a 4 digit readout ( 7 digit cumulative) . The flow range is from 20 LPM to 120 LPM and maximum working pressure is 3.5 bar. Available options are a red cover, 1" brass nipples and a 1" brass " Y" strainer.
- FLOW METER Italia SPA Model Z98 - TUTHILL
The Z98 flow meter has been designed for use with diesel fuel, gasoline and thin lubricating oils. Using mechanical gears, these meters translate flow through a nutating disc into calibrated units that are registered and shown on the face. The meters come with a 3 digit resettable batch register complete with marked tenths as well as a 6 digit maximum cumulative total. They are available with litre or gallon units and are equipped with a calibration screw for adjustment to different liquids. Also suitable for uses with pump or gravity feed systems and are available in the color red as an option. Workable flow range is 20 LPM to 80 LPM with a maximum working pressure of 3.5 bar. Meter has 1" ports and an aluminum housing.
- FILL RITE FLOW METERS Series 900
Flow Meters Series 900 operates at 6 to 40 GPM ( 23 to 151 LPM) , with accuracy of ± 2% . The easy reset register indicates product use up to 999.9 gallons or 9, 999 liters. The master totalizer registers up to 9, 999, 999 gallons/ liters.
Details:
Large, easy to read numbers
Measure fluids at temperatures up to 150° F ( 63° C) and pressures up to 50 PSI ( 3.4 bars) .
Quick reset knob
Flexible flow ports can be positioned vertically or horizontally
UL/ cUL listed
Options:
Gallon or liter reading
1" or 1-1/ 2" ports
Teflon ® or nickel coatings increase selection of compatible fluids
BSP threads
Applications:
Designed for metering diesel fuel, gasoline, kerosene, mineral spirits, stoddard solvent and heptane
- FILL RITE MECHANICAL FLOW METER SERIES 800C
Mechanical flow meters that provide precision and durability in a cost-effective design. The Series 800C meter' s exclusive unicast component mounting configuration assures consistency, particularly in gravity flow applications. The 800C is accurate to within ± 1% at 5 to 20 GPM ( 19 to 76 LPM) .
Details:
Large, easy to read register
Flow ports can be positioned vertically or horizontally
UL/ cUL listed
Gallon or liter reading
3/ 4" or 1" ports
Handles fluid of any viscosity
Strainer for gravity-flow applications traps tank contaminants
Sotera Meters have Teflon ® or nickel coatings to increase selection of compatible fluids
Sotera Meters available in our Online Store
Applications:
Designed for metering diesel fuel, gasoline, kerosene, mineral spirits, stoddard solvent and heptane
Non-corrosive fluids
- FLOW METERS; FLOW METER WATER, GAS, OIL; FLOW METER DIGITAL, SENSOR.
BY ORDER
|